English
Views: 0 Author: Site Editor Publish Time: 2021-09-20 Origin: Site
01. Selection of soft claw material:
The 'soft' here means: good processing performance does not mean it must be lower than the hardness of the workpiece.
For mass production, the hardness of the soft claw will have a great impact on the stability of processing. Choosing a soft claw material with a higher hardness than the workpiece will not only increase the service life of the soft claw, but also have a positive impact on the stability of processing.
02. The installation position of the soft claw on the chuck:
Any T-block exceeding the maximum diameter of the chuck is not allowed, which will pose a great safety risk.
03. Pressure and position when using the claw trimmer:
It is recommended that the pressure during use is close to the pressure during workpiece processing. The chuck is in the middle of the range of movement during processing, and the direction of the clamping force during claw trimming is consistent with the direction of the workpiece clamping force.
